Whatsapp
Posted : Monday, August 19, 2024 11:25 PM
Howmet Aerospace has an immediate opening for a CNC Programmer at our Engines Products - Cleveland Operations, the Tempcraft facility located at 3960 S.
Marginal Rd.
in Cleveland.
This position is responsible for the mechanical design of various molds, dies and fixtures.
This person works with the manufacturing team to develop a manufacturing plan and then executes the plan in the allotted time.
This person also produces written paperwork that documents the NC operations, accurately describes the set-up, and ensures the proper tooling is procured.
This person is expected to follow established procedures that ensure the final part quality and works with manufacturing and inspection personnel to solve problems as they arise.
Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks, and forgings.
We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines, and cleaner power generation.
Job Responsibilities: Interprets designer models and organizes CAD geometry.
(10%) Creates a sequence of cutter paths in CAM software and then checks them using Vericut (55%) Meets with Designers, Die Makers and NC Operators as required, developing a sound manufacturing plan.
(10%) Works with CNC operators and inspectors to solve problems.
(10%) Creates and maintains required job documentation, including time logs.
(15%) Meets deadlines for scheduled deliverables, fe.
set-up sheets, cutter sheets.
Specify tooling appropriate for the operations programmed.
Salary: $33.
58-$47.
02 per hour Basic Qualifications: 2 years’ experience in CNC Machining High Diploma or GED from an accredited institution Preferred Qualifications: 2-4 years’ experience required in CNC programming.
Experience with Unigraphics CAD/CAM software strongly preferred.
Experience in the machining of turbine/airfoil molds and dies strongly preferred.
Fluent with the design software Unigraphics (UG).
Experience or familiar with GOM Inspection software.
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.
S.
person status.
ITAR defines U.
S.
person as an U.
S.
Citizen, U.
S.
Permanent Resident (i.
e.
'Green Card Holder'), Political Asylee, or Refugee.
Verification of employment eligibility will be required at the time of hire.
Howmet Aerospace has an immediate opening for a CNC Programmer at our Engines Products - Cleveland Operations, the Tempcraft facility located at 3960 S.
Marginal Rd.
in Cleveland.
This position is responsible for the mechanical design of various molds, dies and fixtures.
This person works with the manufacturing team to develop a manufacturing plan and then executes the plan in the allotted time.
This person also produces written paperwork that documents the NC operations, accurately describes the set-up, and ensures the proper tooling is procured.
This person is expected to follow established procedures that ensure the final part quality and works with manufacturing and inspection personnel to solve problems as they arise.
Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks, and forgings.
We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines, and cleaner power generation.
Job Responsibilities: Interprets designer models and organizes CAD geometry.
(10%) Creates a sequence of cutter paths in CAM software and then checks them using Vericut (55%) Meets with Designers, Die Makers and NC Operators as required, developing a sound manufacturing plan.
(10%) Works with CNC operators and inspectors to solve problems.
(10%) Creates and maintains required job documentation, including time logs.
(15%) Meets deadlines for scheduled deliverables, fe.
set-up sheets, cutter sheets.
Specify tooling appropriate for the operations programmed.
Salary: $33.
58-$47.
02 per hour Basic Qualifications: 2 years’ experience in CNC Machining High Diploma or GED from an accredited institution Preferred Qualifications: 2-4 years’ experience required in CNC programming.
Experience with Unigraphics CAD/CAM software strongly preferred.
Experience in the machining of turbine/airfoil molds and dies strongly preferred.
Fluent with the design software Unigraphics (UG).
Experience or familiar with GOM Inspection software.
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.
S.
person status.
ITAR defines U.
S.
person as an U.
S.
Citizen, U.
S.
Permanent Resident (i.
e.
'Green Card Holder'), Political Asylee, or Refugee.
Verification of employment eligibility will be required at the time of hire.
About Howmet Aerospace Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
The Company’s sales for 2022 approximated $5.
7 billion.
The Company’s primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With nearly 1,150 granted and pending patents, the Company’s differentiated technologies promote more fuel efficiency for aircraft and commercial transportation.
For more information, visit www.
howmet.
com , including content shared during the Company’s May 2022 Technology Day.
Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer.
We celebrate diversity and are committed to creating an inclusive environment for all employees.
We do not discriminate based upon race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.
com
Marginal Rd.
in Cleveland.
This position is responsible for the mechanical design of various molds, dies and fixtures.
This person works with the manufacturing team to develop a manufacturing plan and then executes the plan in the allotted time.
This person also produces written paperwork that documents the NC operations, accurately describes the set-up, and ensures the proper tooling is procured.
This person is expected to follow established procedures that ensure the final part quality and works with manufacturing and inspection personnel to solve problems as they arise.
Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks, and forgings.
We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines, and cleaner power generation.
Job Responsibilities: Interprets designer models and organizes CAD geometry.
(10%) Creates a sequence of cutter paths in CAM software and then checks them using Vericut (55%) Meets with Designers, Die Makers and NC Operators as required, developing a sound manufacturing plan.
(10%) Works with CNC operators and inspectors to solve problems.
(10%) Creates and maintains required job documentation, including time logs.
(15%) Meets deadlines for scheduled deliverables, fe.
set-up sheets, cutter sheets.
Specify tooling appropriate for the operations programmed.
Salary: $33.
58-$47.
02 per hour Basic Qualifications: 2 years’ experience in CNC Machining High Diploma or GED from an accredited institution Preferred Qualifications: 2-4 years’ experience required in CNC programming.
Experience with Unigraphics CAD/CAM software strongly preferred.
Experience in the machining of turbine/airfoil molds and dies strongly preferred.
Fluent with the design software Unigraphics (UG).
Experience or familiar with GOM Inspection software.
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.
S.
person status.
ITAR defines U.
S.
person as an U.
S.
Citizen, U.
S.
Permanent Resident (i.
e.
'Green Card Holder'), Political Asylee, or Refugee.
Verification of employment eligibility will be required at the time of hire.
Howmet Aerospace has an immediate opening for a CNC Programmer at our Engines Products - Cleveland Operations, the Tempcraft facility located at 3960 S.
Marginal Rd.
in Cleveland.
This position is responsible for the mechanical design of various molds, dies and fixtures.
This person works with the manufacturing team to develop a manufacturing plan and then executes the plan in the allotted time.
This person also produces written paperwork that documents the NC operations, accurately describes the set-up, and ensures the proper tooling is procured.
This person is expected to follow established procedures that ensure the final part quality and works with manufacturing and inspection personnel to solve problems as they arise.
Howmet Engines is a world-class producer of aero engine and industrial gas turbine components, including airfoils, rings, disks, and forgings.
We excel in vacuum melted superalloys, machining, performance coatings and hot isostatic pressing for high performance parts that enable the next generation of quieter, more fuel-efficient aero engines, and cleaner power generation.
Job Responsibilities: Interprets designer models and organizes CAD geometry.
(10%) Creates a sequence of cutter paths in CAM software and then checks them using Vericut (55%) Meets with Designers, Die Makers and NC Operators as required, developing a sound manufacturing plan.
(10%) Works with CNC operators and inspectors to solve problems.
(10%) Creates and maintains required job documentation, including time logs.
(15%) Meets deadlines for scheduled deliverables, fe.
set-up sheets, cutter sheets.
Specify tooling appropriate for the operations programmed.
Salary: $33.
58-$47.
02 per hour Basic Qualifications: 2 years’ experience in CNC Machining High Diploma or GED from an accredited institution Preferred Qualifications: 2-4 years’ experience required in CNC programming.
Experience with Unigraphics CAD/CAM software strongly preferred.
Experience in the machining of turbine/airfoil molds and dies strongly preferred.
Fluent with the design software Unigraphics (UG).
Experience or familiar with GOM Inspection software.
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.
S.
person status.
ITAR defines U.
S.
person as an U.
S.
Citizen, U.
S.
Permanent Resident (i.
e.
'Green Card Holder'), Political Asylee, or Refugee.
Verification of employment eligibility will be required at the time of hire.
About Howmet Aerospace Howmet Aerospace Inc.
(NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries.
The Company’s sales for 2022 approximated $5.
7 billion.
The Company’s primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels.
With nearly 1,150 granted and pending patents, the Company’s differentiated technologies promote more fuel efficiency for aircraft and commercial transportation.
For more information, visit www.
howmet.
com , including content shared during the Company’s May 2022 Technology Day.
Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer.
We celebrate diversity and are committed to creating an inclusive environment for all employees.
We do not discriminate based upon race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics.
If you need assistance to complete your application due to a disability, please email TalentAcquisitionCoE_Howmet@howmet.
com
• Phone : NA
• Location : 3960 S Marginal Rd, Cleveland, OH
• Post ID: 9001389362
